LED Downlights Installation Instructions
LED downlights are often as easy to fix as any common incandescent light bulb. Most applications consist of plugging them into a plug that flows off your mains Alternating Current (AC 110-230V) because high-quality LED lights have their own built-in transformers, it's a plug and play, DIY situation that can be easily and speedily achieved without transformers on any kind of downlight, which is often the bothersome case when running halogens. But, it is vitally important to note that there are a few circumstances that require a bit more tinkering in order that your LED Downlights engage in best level and don't get broken in the process.
Two essential considerations to think about when installing your LED lights are whether your downlights will be having off a Direct Current (DC 12V) installation or whether you are using a dimmable option. In both cases, it is really important to ensure that you have the best hardware setup so that your LED Downlights are able to shine their best for a longer duration of their operating lives.
Initially, if you are planning to run your downlights off a 12V DC system, you'll really need to purchase MR16 (outlet type) downlights and have the right transformer fixed. The Magnetic Transformer is the most commonly used power modulating device for a lot of homes and businesses. The transformer type has to optimally run your LED lights. They are also very cheap and you can find them at any electrical shop. If you've got one, then good - again it's a straightforward plug and play device. However, LED Downlights will NOT function with an Electronic Transformer (or better known in the technical industry as "Switch Mode Power Supply"). So, best shot is to get your brotherly neighborhood Sparky (electrician) to come in and have a look and see as he will be able to detect, source and change that necessary transformer.
It's worth saying that you should not run a blend of different lighting technologies on the same 12V circuit as you may experience a drop in illumination of your LED Downlights or they may not turn on at all. Through a 12V equipment it is either all LEDs or all Halogens.
More over, if you want to manage to dim your led lights, then you ought to purchase a dimmable LED Downlight option and acquire the right dimmer switch mounted. A Bell-Push Dimmer Switch is the optimum device used for handling the increase or decrease of voltage to your dimmable LED Downlights and should be offered to you by your dimmable LED supplier when you make your purchase. LED lights will NOT run well (or NOT at all occasionally) with the old styled Push-Button dimmer switches. Again, like the Magnetic Transformer, a Bell-Push Dimmer press button is also essential and fairly inexpensive to obtain.
So, if you need a 12V LED Downlight or maybe a dimmable option (either on AC or DC currents) you will need to ensure you have a Magnetic Transformer available or a Bell Push Dimmer Switch mounted appropriately. This will be certain that your LED lights generates a 100% efficiency and live out their amazingly long lives with no hassles. Be sure to follow the LED Downlights Installation guidelines as received from your LED Lighting supplier and get the assistance of a trained electrician, as it is important to complete the installation safely and right the first time around.