Материал из IrkutskWiki
Перейти к: навигация, поиск

Learning building your own COMPUTER from scratch can be a very difficult task knowing nothing about computers. However once you learn how to do it along with understand exactly how to proceed, it actually becomes quite enjoyable to be able to easily strip down and build up old or brand-new PC's. I would want to take this possibility to lay out the basic components of a pc and help you discover ways to build a laptop or computer from scratch.

PC Components

The most typical pc components that you need to have are the particular mouse, keyboard, hard drive, floppy drive, ram chips, sound and images card, power supply, motherboard and monitor. I'm assuming that you'll know what each of these components look like. If you are generally unsure about a few components just look for pictures of them on the net and you will dsicover what they are usually.

Connection Process

Firstly you have to work with the mother board and the mother board installation plate. Firstly, gently screw the motherboard onto mom board plate while using notches or screws which were provided with your package or kit. Once this is done you will need to insert the COMPUTER (Central Running Unit) straight into its slot about the motherboard. Sometimes these COMPUTER sockets have levers which you should gently release for you to open it up so become aware of that. Gently slide the CPU into its socket ensuring the pins about the backside slide in correctly otherwise it could get damaged. You can now clip the lever back into place and be sure it is safe.

Now you will have to attach the heatsink to the CPU chip. You might realize that the CPU already incorporates the heatsink/fan mounted on it then you definitely can read more. Now you should connect the tiny cable from the actual heatsink fan to the corresponding socket for the motherboard to give it power.

The next step should be to place the ram chips to their respective slots that are long and slim. Once this continues to be done you may well mount the motherboard increasing plate onto along side it of the personal computer and screw/slip it in so that it is attached properly.

The power supply could be the next component to manage. The power supply area is generally located at the back of the pc case and it is indicated with screw holes that happen to be unoccupied. Just try along with maneuver it around to suit with the corresponding holes when you screw it inside. The power supply includes a main system connector which gets attached to the power slot around the motherboard, a floppy power connector which gets connected to the floppy drive and a few standard peripheral energy connectors (crimson, yellow and dark wires) which get connected to your hard devices and cd roms. You will must mount the hard drives, cd roms and floppy drives along with connect them using those connectors ensuring that the red cable on each energy connector is pointed inwards for the motherboard. I'll explain precisely why below.

Right, now we move onto both the ports on your motherboard called the primary and secondary IDE Plug-ins. You will notice them as they are rectangular together with brackets around all of them. these ports are employed to connect the hard disks and cd roms. The cables that get attached to these two ports are 40 flag IDE cables along with have 3 internet connections on each wire. Make sure the longest perhaps the cable is attached to the IDE ports. You need to connect the primary IDE cable from the motherboard to your hard drive(s) as well as the secondary IDE port is utilized to connect the DVD Roms for a motherboard. When you plug these IDE cables into the cdroms and hard drives ensure that the red wire strip is side by side with the crimson wire strip with the power connectors that are connected to people devices. Consult your manual for those who have one to see how to use the different jumpers to change between master along with salve drives upon each port. This will let you choose which devices are primary and secondary.

Now that the electricity supply is linked to the motherboard plus the various other components you will need to plug graphics along with sound card into their slots. Once this is done be sure to connect the front panel connectors to the corresponding LED lights which means that your lights will appear when the computer boots. Failure to do so will result in non function from the system.

Lastly make sure everything is linked properly. This includes the actual external mouse, keyboard, monitor cable along with power cables so your computer will first turn on and function appropriately. If all is performed well then it must be okay.building computer